Carlton 1712 Návod k obsluze stáhnout pdf (Strana 86)

12” CHIPPER SERVICE

HYDRAULICS

• Check hydraulic oil level daily. This

Carlton chipper is equipped with a sight

glass to check hydraulic oil level. If oil

can be seen in glass, oil level is good.

Only fill tank 7/8 full to allow for

expansion.

• On a new chipper, change the hydraulic

oil filter when the chipper has been

operating for 10 hours. Replace with the

same type of in-tank filter element

supplied originally, available through

Carlton or Carlton dealers. From this

point on, change the filter every 200

hours of operation.

• Change hydraulic oil every 500 hours of

operation or at least once a year

depending on use. Flush the hydraulic

tank when changing the hydraulic oil.

Replace oil if it has a burnt odor or if it

is contaminated. Replace oil if the

chipper has been stored for a long period

of time (all winter).

• Drain the hydraulic tank using the drain

plug located on the bottom of the tank.

Dispose of used oil according to state

regulations.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 164 165

Žádné komentáře

Carlton 1712 Návod k obsluze Strana 86